1. Open the leg package and remove all the pieces to ensure nothing is missing.
2. The mounting plates from this package will feature an arrow. Place the mounting plate so it is flush to the bottom of the ottoman and so that the arrow is facing outwards towards the corner.
3. Align the screw holes in the leg mounting plates with those on the ottoman and screw into place by hand, slowly tightening the screws little by little on each side. You will use two hand screws with each mounting plate.
4. Remove the black rubber cap from the screw on each leg, then screw one leg into each mounting plate by hand. Screw in the leg tightly until it is flush with the mounting plate and the leg is straight.
5. Carefully lift and flip the ottoman upright onto its legs and place the cushion on top.
6. Kick your feet up and relax!
Was this article helpful?
0 out of 1 found this helpful
The Endy Customer Care team will be unavailable for the National Day for Truth and Reconciliation. We will be back online tomorrow at 10am to answer your inquiries.